级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

平行平板横向剪切干涉仪装调误差的矫正方法研究

对平行平板双光路横向剪切干涉仪的装调进行了研究,提出了一种矫正两个平行平板之间角度误差的方法.输出激光的波前采用Zernike多项式拟合,经过理论推导,发现两个方向差分波前求解出的倾斜像散之差与平行平板的角度误差存在线性关系,利用两个方向倾斜像散之差来矫正两个平行平板之间的角度误差.在平行平板横向剪切干涉仪的装调过程中使两个方向差分波前的倾斜像散之差为零即可以使两个方向的平行平板之间的角度误差值为零.进一步地从实验上证明了这个线性关系,对于所用的实验系统,当离焦像差为-3.224 7±0.001 8,两个方向差分波前的倾斜像散之差波动范围为±2.0×10^-3时,平行平板的角度误差可以控制在8.82″之内,高阶像差对平行平板的角度误差调节精度的影响约为1.63″.该方法具有装调简单、精确度高,易于流程化操作的优点.     

单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

Georges Sagnac: A life for optics

Georges Sagnac is mostly known for the optical effect in rotating frames that he demonstrated in 1913. His scientific interests were quite diverse: they included photography, optical illusions, X-ray physics, radioactivity, the blue of the sky, anomalous wave propagation, interferometry, strioscopy, and acoustics. An optical theme nonetheless pervaded his entire œuvre. Within optics, an original theory of the propagation of light motivated most of his investigations, from an ingenious explanation of the Fresnel drag, through the discovery of the Sagnac effect, to his quixotic defense of an alternative to relativity theory. Optical analogies efficiently guided his work in other domains. Optics indeed was his true passion. He saw himself as carrying the torch of the two great masters of French optics, Augustin Fresnel and Hippolyte Fizeau. In this mission he overcame his poor health and labored against the modernist tide, with much success originally and bitter isolation in the end.     

基于光纤智能夹层传感结构的应力测量研究

制作了一种模块化的光纤传感夹层,对夹层内的光纤传感器的应力特性进行了实验研究。分析了应变对传感系数的影响,对埋入到光纤智能夹层中的两种光纤传感器的输出特性进行了比较。实验结果表明:光纤Bragg光栅传感器的波长漂移与应变之间具有理想的线性关系,但应变灵敏度由1.2pm/με降至1.15pm/με;由于制作工艺的局限,对于非本征F-P光纤传感器,当应变达到350με后,应变与载荷具有较好的线性响应。与非本征F-P光纤传感器相比,光纤Bragg光栅传感器是光纤智能夹层首选的应变传感器。将埋入了Bragg光栅传感器的智能夹层粘贴于某型飞机的翼-身连接构件内部进行监测,实验结果为光纤智能夹层应用于复合材料结构的应变监测提供了参考。     

在PC机上实现开环光纤陀螺数字解调的方法研究

本介绍了开环光纤陀螺输出信号数字调解在通用PC机上的实现方法,合理地选取了相关参数,为研制采用DSP微处理器的数字式光纤陀螺提供良好的技术基础。     

HL-2M 装置固态亚毫米波干涉系统研制

发展了一套固态亚毫米波外差干涉系统和一种基于全相位快速傅里叶变换(apFFT)的相位处理方法用 于测量 HL-2M 初始等离子体电子密度。该系统采用平面型二极管倍频技术对低频的锁相微波源进行高次倍频以 产生功率大于 0.1MW、频率 306.9GHz 的探测波。基于 apFFT 的相位处理数值算法可以从原始信号中提取相位信 息,缓解由可能的高水平密度扰动导致的相位跳变。系统的固有时间分辨率为 5μs,电子密度测量范围在 10¹⁶~10²⁰m⁻³。在 HL-2M 装置首次实验期间,该系统被安装在中平面上,利用装置内壁反射实现干涉测量,成功 测量了线平均电子密度。      

Analysis of the fringes visibility generated by a lateral cyclic shear interferometer in the retrieval of the three-dimensional surface information of an object

We report the evaluation of the topography of an object with projected fringes generated with a lateral cyclic shear interferometer (CSI) and we then compare the topography recovery obtained with the proposed method with the one obtained from a coordinate measuring machine (CMM). We also study how the fringes visibility along the z axis affects the retrieval. Finally, we discuss the advantages and drawbacks of this profilometry system.     

Towards a solid-state ring laser gyroscope

In this paper, we report our recent progress towards a solid-state ring laser gyroscope (RLG), where mode competition is circumvented by active control of differential losses, and nonlinear effects are mitigated by longitudinal vibration of the gain medium. The resulting dynamics is significantly different from that of a classical helium–neon RLG, owing in particular to parametric resonances that occur when the Sagnac frequency is an integer multiple of the crystal vibration frequency. We describe the main experimental and theoretical results obtained so far, and the prospects of practical applications in the near future.     

基于LabVIEW机器视觉的迈克耳孙干涉仪实验

基于机器视觉设计了迈克耳孙干涉仪实验,采用机器视觉技术替代人眼对目标(干涉圆环)进行分析与测量,可有效避免因视觉疲劳而造成的测量错误.